waste incinerator manufacturers china
5-1- Chambre de post combustion est installée au dessus du foyer de combustion, elle est constituée d'un cylindre métallique revêtu...
5-1- Chambre de post combustion est installée au dessus du foyer de combustion, elle est constituée d'un cylindre métallique revêtu...
Incinerators used will be restricted to daylight hours of operation. This includes shutdown, cleaning and maintenance. Waste streams shall...
Equipped with main combustion chamber and a second Room for reburning Made to ensure complete combustion of the gases resulting ...
The following requirements are to be considered as an essential part of the technical specifications for each equipment...
It's anticipated that the Bidder will cooperate closely with PATH and target Hospitals for the new waste management building/area and...
SECTION V TECHNICAL SPECIFICATIONS OF THE INCINERATOR General Description The plant has to have four different sections...
Finally, steam to the coat should shut off, the unloading door is to be opened Then the shaft and mixing...
Medical waste, disposable syringes, infusion sets processing, cotton yarn, the operating room, the residual limb, waste rubber gloves, protective clothing and infectious and harm venereal hospital bed supplies, general wastes Hight Temperature Flue Gas Analysis...
Sterilization time: approx. 30 minutes at 121◦C/1.1 Tavern or approx 15 minutes at 132◦C/2.5 Tavern to reach 6log10 sterility Fragmentation...
Model HICLOVER YD-30C Picture Feed Capacity Average 30-50 kgs per feed Burning Rate Average 30 kgs per hour...
Incinerators to be appropriate for the expert disposal of clinical & & & & medical waste/ rubbish having a better...
Battery Charger: Must be built in battery charger, rectifier type with transformer, circuit breaker and overload protection plugs into any...
Items/Model TS1000 Picture Principle Solid Waste Incineration Treatment Burn Rate Average 1000kg/hour Feed Capacity Average 6000kg/feeding Control Mode PLC(Programmable...
? Opening Doors – the closed and fixation automated system, that are handled remotely by the operator. ? Designed to...
“Waste chamber Chamber capacity 300 kg Chamber quantity .54m3 Chamber dimensions (outside) Width: 91cm, Height: 86cm Length: 152cm Door opening...
*Primary combustion chamber *Secondary combustion chamber *Smoke filter chamber * Stainless Steel chimney *Auto PLC control system *Italy brand burner...
Incinerator Items/Model HICLOVER TS30(PLC) Burn Rate (Average) 30-50 kg/hour Feed Capacity(Average) 60kg/feeding Control Mode PLC Automatic Primary Combustion Chamber...
air retention for at least 2 seconds at a temperature of less than 850C, the combustion to be able to...
Vertical closed furnace combustion chamber incinerator Medical waste, disposable syringes, infusion sets processing, cotton yarn, the operating room, the residual limb, waste rubber gloves, protective clothing and infectious and harm venereal hospital bed supplies, general wastes. 10-20kg/time (daily burn 3-6times, each time consume about 1 hour) total daily waste capacity 120 kg Incinerator Items/Model HICLOVER TS10(PLC) Burn Rate (Average) 10-20 kg/hour Feed...
Incinerator Items/Model HICLOVER TS30(PLC) HICLOVER TS50(PLC) HICLOVER TS100(PLC) Burn Rate (Average) 30-50 kg/hour 50-100 kg/hour 100-150 kg/hour...
Dimensions: World standard: 0.83m(I) x 1.0m(w) x 1.4m(h) Burning efficacy: >98% china double chamber incinerator Features: ? Waste type and...
Double Combustion Chamber Medical Waste IncineratorHot Face,High aluminum firebrick 55% of Al203,1750°C Grade. Code face, High Rate Refractory Ceramic Fiber, 1050°C Grade
Number item: 01 unit Can you please send us cataloge detail for Pet Cremation of dogs, cats. – Please services...
18 Electrical supply required 3-phase 19 Auxiliary fuel Diesel or paraffin 20 Main burner 21 Secondary (Later ) burner 22...
INSULATION. Limiting Regular solution limit 1000 amounts C. Waste kind: MEDICAL CARE WASTE Small Capacity: 50Kg/Hour set tons. Thickness 25mm...
Would plant operations be usable on a basis of 24 hours per day, 7 days a week, all year long...
An operating test ought to be conducted to make certain that each of the control components have been properly installed...
The successful bidder will deliver the incinerator slide in a container. A containerized alternative is also acceptable. incinerator with a...
Supervision of installation of the new incinerator set shall be provided by the successful Bidder while labor and heavy duty...
Flue Gas Cleaning System ? quoted individually ) 7 Chimney Height 10m (minimal ) ...
Incinerator dual chamber with capacity 1.5 m3/batch or 6 m3/ day, electronic thermocontrol range 0‐1200 C, thermocouple, air supply capacity...
Incinerate: medical waste and general waste Capacity to burn waste: 400-500kg/hr Fuel: Diesel Gas Consumption: 10 liters/hr maximum Incineration temperature:...
The incinerator fuel tank shall meet the following requirements: a) The tank shall be installed above ground and according to...
I also research their product information and find it don't require fuel and also not require fan blower but that...
Medical waste is posing a growing problem all over the world, jeopardizing the health of staff, patients, disposal workers and anyone else coming into contact with the often hazardous materials discarded by hospitals and other healthcare sites. Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range of waste streams. Incineration is still the preferred way to process medical waste without endangering the heath patients, staff or anyone else coming into contact with them. Clinical waste is costing more and more to dispose of safely. Health Clinics and Health center can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or viruses. HICLOVER is now offering a full range of medical waste incinerators, designed to provide efficient waste destruction, utilizing best available technologies and environmentally friendly process. Due to the secondary chamber with its 2 second retention period, our medical incinerator range is well suited to process medical waste. Requirement 20% -25% of the full waste created by medical treatment facilities is associated to as hazardous and...
Programming controls. planned method. Appropriate prepurge, ignition, postpurge, and modulation ought to be verified. A stopwatch ought to be used...
Fully automatic sequential control provided by internal Secondary chamber pre-heat Burn cycle (variable) Cool down cycle PLC system providing control...
Anchor all gear to building floor or construction as shown or as recommended by manufacturer with allowance for thermal expansion...
Including:Incinerator: Structure to be specified – A receiving cage for biomedical waste; – A combustion chamber using a chimney using...
Test shall be conducted by factory authorized representative of incinerator manufacturer. Demonstrate required weight reduction of specified waste. Waste...
The incinerator will then take supply from the DO tank through its DO feed pumps to its respective burners. An...
The successful Bidder shall inform CEB in writing at least three (3) weeks prior to the carrying out of factory...
HICLOVER now offer a full range of containerized incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerization enables immediate waste management as the units are pre-assembled and pre-installed.Containerization is the most feasible and viable option in contrast to the construction of on-site facilities and housing structures, eliminating the man power and costs involved. The system has the added benefit of total mobility (both local and international), and is ideal for military and civil camps and remote locations where infrastructure is scarce. Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC) Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour...
standard type, 11m long,self supporting Capacity-220kgs/hr refuse-hospital waste average moisture-15-20% on fist time DIMENSIONS height: 2710mm span: 2840mm Width; 2450mm...
A chamber of post combustion of gases * A burner of combustion of gases, * A device of injection of...
incinerator. High Temperature Waste Incinerator Model D. MB 750XL Burn Rate-150Kg/hour minimum Weight(Kg)-4000kg Secondary Chamber (double chamber with post-burning) Gas...
Equipment Access Openings: Organize all piping and equipment to allow access to openings without disassembly of piping or equipment. Provide...
heavy Duty Steel casing High Quality refectory lining & insulation 1 x Diesel fired ignition burners operated on...
Burning Capacity: 125 kg minimum/time (3-6times/day), double chamber, double combustion system Per your advertisement for 300 kg.hr. Model – We...
The temperature is over the minimum and under the maximum required temperature (e.g 1150? C) of the thermal reactor (partial...